Industrial Liner Installation

Industrial Liner Installation Contractor — Containment & Leak Prevention

Plastic Fusion Fabricators is a leading industrial liner installation contractor, providing geomembrane containment and leak-prevention systems for industrial facilities nationwide. We install fusion-welded HDPE, LLDPE, and RPP liners for the ponds, pits, basins, and containment areas that industrial operations depend on to hold process water, contain chemicals and fuels, and keep regulated materials out of the soil and groundwater. As an installer and fabricator — not a liner reseller — we handle the work end to end: fabrication, deployment, welding, and testing. With 40+ years of geomembrane installation across 24 states, Plastic Fusion is the contractor industrial facilities call when the containment has to perform.

Industrial containment is unforgiving. The liner has to stand up to the chemistry of what it holds, the loads and abrasion of the site, and the scrutiny of the regulations that govern it — and it has to do that for years without leaking. That’s a job for an experienced installer with the right materials and the equipment to weld and test every seam, not a roll of liner and a hope it holds.

Industrial Liner Installation, Application by Application

Industrial containment covers a wide range of applications, and we install across all of them. For the specific engineering of each, see the dedicated pages:

• Chemical containment — engineered containment for acids, caustics, and process chemicals: chemical containment systems
• Fuel and oil containment — fuel-resistant liners for petroleum products: fuel containment liners
• Secondary containment — SPCC-compliant containment around tanks and tank farms: secondary containment liners
• Frac and oilfield containment — high-volume containment for fracturing fluids and produced water: frac pond and pit liners

Industrial Pond & Pit Liners

We install industrial pond liners and industrial pit liners for process-water storage, settling, evaporation, and containment. These aren’t backyard ponds — they’re engineered, often large-scale basins that have to hold industrial fluids reliably. We fabricate the liner to the basin, deploy and anchor it to the engineered grade, and fusion-weld every seam into a continuous, leak-tested barrier. Industrial HDPE pond liners are the workhorse here for their durability and chemical resistance; we match the material to the fluid and the duty.

HDPE Lining Contractor

When a facility needs an HDPE lining contractor, they’re looking for an installer who can handle industrial-grade geomembrane at scale — and that’s our core work. We weld HDPE, LLDPE, and RPP into continuous containment systems, with the fabrication capability to minimize field seams and the testing to prove the installation is sound before it goes into service. Our crews mobilize nationwide for industrial liner installation projects across the country.

Industrial Liner Materials

• HDPE (high-density polyethylene) — the industrial workhorse: excellent chemical resistance, durability, and value at scale
• RPP (reinforced polypropylene) — flexible, highly chemical-resistant for aggressive fuels, chemicals, and harsh service
• LLDPE — added flexibility for irregular sites and ground movement

We match the material and thickness to the application and the chemistry it has to withstand. We do not use PVC for industrial containment, where it tends to fall short on chemical compatibility and longevity.

Why Industrial Facilities Choose Plastic Fusion

• 40+ years of industrial geomembrane installation
• Installer and fabricator — full-scope work, not a liner reseller
• Fusion-welded, seam-tested, continuous containment
• HDPE, LLDPE, and RPP matched to the chemistry and the duty
• Nationwide mobilization — active projects across 24 states
• Containment and leak prevention engineered to the application and the regulations

Industrial Liner Installation FAQs

What does an industrial liner installation contractor do?

An industrial liner installation contractor fabricates and installs geomembrane containment systems for industrial facilities — lining ponds, pits, basins, and containment areas to hold process water, chemicals, and fuels and prevent leaks into the soil and groundwater. The work includes fabricating the liner to the site, deploying and anchoring it, fusion-welding the seams into a continuous barrier, and testing the installation. We handle all of it.

What is the best material for industrial liner installation?

For most industrial containment, HDPE is the material of choice — durable, chemically resistant, and cost-effective at scale. RPP is used for aggressive chemicals and fuels that need extra chemical resistance, and LLDPE adds flexibility for irregular sites. We select the material based on the fluid being contained and the demands of the site.

Do you install industrial pond and pit liners?

Yes. We install industrial pond and pit liners for process water, settling, evaporation, and containment — engineered, fusion-welded, and tested for the fluid and the duty. Industrial HDPE pond liners are our most common specification for their durability and chemical resistance.

Do you work nationwide?

Yes. We have active projects across 24 states and mobilize nationwide for industrial liner installation.

Request a Quote

If your facility needs industrial containment installed, upgraded, or repaired — process-water ponds, pits, chemical or fuel containment, or secondary containment — Plastic Fusion is the industrial liner installation contractor that fabricates, installs, welds, and tests it to perform. For the broader range of containment applications, see our pond and containment liner applications. Contact us with your project details for a quote.

ote.